Befaco Oneiroi

Description:

Befaco Oneiroi Pod, Experimental Drone Synthesizer and Audio Processor, Four mixable sound sources: Sine wave oscillator, supersaw/wavetable oscillator, stereo looper and stereo input, Pitch and detune controls for both oscillators, Varispeed... More

Description:

Befaco Muxlicer, Eurorack module, Signal processor with bidirectional switch and gate generator, Consists of the sections step controller, gate generator and analogue switch, Muxlicer can be used as a voltage-controlled signal router (8-on-1 or... More

Description:

Befaco TRS-MIDI Cable B, Jack - MIDI Adapter Cable, Length: 1.5 m, 3.5 mm Stereo jack to 5-pin DIN connector, Compatible with units from 1010Music, Arturia, Elektron, Erica Synths, Faderfox, Malekko, Novation and Darkglass, Classification: TRS-MIDI... More

Description:

Befaco 7U Case, Aluminum Eurorack Case, 36 Slots for Eurorack modules, Rear connections: 6x 6.3 mm jack (balanced or unbalanced) for audio and CV signals, MIDI In/Out/Thru (5-pin DIN), USB-B port and 2x USB-A port for powering other devices,... More

Description:

Befaco Pony VCF, Eurorack Module, Analogue low-pass filter with 3-channel mixer and VCA, Mixer with three audio inputs, level display and normalised feedback loop on channel 3, Low-pass filter with controls for cutoff and resonance, No level loss at... More

Description:

Befaco Lich, Eurorack module, Programmable multifunctional module, Based on the OWL platform from Rebel Technology, Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface, 4 assignable control knobs and 2... More

Description:

Befaco MEX, Eurorack Module, Expander module for Befaco Muxlicer (Art.#466975#), Expands Muxlicer by an additional track with 8 gate steps, Three modes per step selectable: No Gates, All Gates (signal of the Muxlicer gate output) and Pass In... More

Description:

Befaco Noise Plethora, Eurorack Module, Digital noise generator with 3 channels, 40 Different algorithms, individually selectable for channel A and B, Analogue OTA multimode filter (low-pass, band-pass, high-pass) per channel with cutoff control,... More

Description:

Befaco Octaves VCO, Eurorack Module, Analogue Additive Oscillator, 6 Channels, each with square waveform, level fader, CV input (VCA) and individual output, Cascaded outputs allow the creation of any number of submixes, Octave selector switch and... More

Description:

Befaco CV Thing, Eurorack module, Programmable CV to MIDI interface, 8 CV inputs, each assignable to MIDI messages such as CC, Notes, Program Change, NRPN and Clock, Configurations can be saved, USB-B port (class compliant) and MIDI-TRS socket for... More

Description:

Befaco MIDI Thing V2, Eurorack Module, Configurable MIDI to CV converter, 12 Outputs, each of which can be configured as Note-CV, Gate, Velocity, Channel Pressure, MIDI CC, Clock, Start/Stop, Drum Trigger, LFO, Oscillator, ADSR or NRPN, Freely... More

Description:

Befaco Slew, Eurorack Module, Analogue Slew-Limiter, Fader for rise and fall time, Three selectable time ranges, Shape control for adjusting the characteristic curve, Assignable CV input: Rise, rise & fall, fall, Gate outputs for rise and fall... More

Description:

Befaco A\*B+C V2, Eurorack Module, Dual voltage processor, Per channel: Three signal inputs (A, B, C), gain control for B and C (normalised to +5 V), gain switch for B and C (gain x1, gain x2, gain x1 inverted), signal LEDs, signal output, Mix... More

Description:

Befaco MuDi, Eurorack Module, Clock distributor and divider, Clock/reset input: 3.5 mm TRS jack, Three outputs for distributing the clock signal without interruption, Four clock divider outputs: 1/2, 1/4, 1/8, 1/16, Scales all clock outputs to +10... More