Befaco 7U Case

Description:

Befaco Muxlicer, Eurorack module, Signal processor with bidirectional switch and gate generator, Consists of the sections step controller, gate generator and analogue switch, Muxlicer can be used as a voltage-controlled signal router (8-on-1 or... More

Description:

2 Many Synths Eurorack Case 7U 104HP Brown, Eurorack Case 7U 104HP, Made of oak wood and finished with hardwax oil, Constant Lab SeventyPWR power supply, 2 Bus boards with 19 slots each for modules, Black aluminium rails with M3 threaded inserts,... More

Description:

Make Noise 7U 4 Zone Case, Eurorack Case, Bus board with 4 isolated sections, each with 1.0A (+12V) / 0.5A (-12V), 33 Slots for Eurorack modules, Removable lid, Carrying handle, CV bus with 4 channels and LEDs for signal level and polarity for each... More

Description:

2 Many Synths Eurorack Case 7U 104HP Oak, Eurorack Case 7U 104HP, Made of oak wood and finished with hardwax oil, Constant Lab SeventyPWR power supply, 2 Bus boards with 19 slots each for modules, Aluminium rails with M3 threaded inserts, Bevelled... More

Description:

Befaco TRS-MIDI Cable B, Jack - MIDI Adapter Cable, Length: 1.5 m, 3.5 mm Stereo jack to 5-pin DIN connector, Compatible with units from 1010Music, Arturia, Elektron, Erica Synths, Faderfox, Malekko, Novation and Darkglass, Classification: TRS-MIDI... More

Description:

Befaco Pony VCF, Eurorack Module, Analogue low-pass filter with 3-channel mixer and VCA, Mixer with three audio inputs, level display and normalised feedback loop on channel 3, Low-pass filter with controls for cutoff and resonance, No level loss at... More

Description:

Befaco Lich, Eurorack module, Programmable multifunctional module, Based on the OWL platform from Rebel Technology, Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface, 4 assignable control knobs and 2... More

Description:

Befaco MEX, Eurorack Module, Expander module for Befaco Muxlicer (Art.#466975#), Expands Muxlicer by an additional track with 8 gate steps, Three modes per step selectable: No Gates, All Gates (signal of the Muxlicer gate output) and Pass In... More

Description:

Befaco Noise Plethora, Eurorack Module, Digital noise generator with 3 channels, 40 Different algorithms, individually selectable for channel A and B, Analogue OTA multimode filter (low-pass, band-pass, high-pass) per channel with cutoff control,... More

Description:

Befaco Octaves VCO, Eurorack Module, Analogue Additive Oscillator, 6 Channels, each with square waveform, level fader, CV input (VCA) and individual output, Cascaded outputs allow the creation of any number of submixes, Octave selector switch and... More

Description:

Befaco CV Thing, Eurorack module, Programmable CV to MIDI interface, 8 CV inputs, each assignable to MIDI messages such as CC, Notes, Program Change, NRPN and Clock, Configurations can be saved, USB-B port (class compliant) and MIDI-TRS socket for... More

Description:

Befaco MIDI Thing V2, Eurorack Module, Configurable MIDI to CV converter, 12 Outputs, each of which can be configured as Note-CV, Gate, Velocity, Channel Pressure, MIDI CC, Clock, Start/Stop, Drum Trigger, LFO, Oscillator, ADSR or NRPN, Freely... More

Description:

Befaco Oneiroi, Eurorack Module, Experimental digital synthesiser voice, Four mixable sound sources: Sine oscillator, supersaw/wavetable oscillator, Stereo looper and stereo input, Pitch and detune controls for both oscillators, Varispeed control... More

Description:

Befaco Slew, Eurorack Module, Analogue Slew-Limiter, Fader for rise and fall time, Three selectable time ranges, Shape control for adjusting the characteristic curve, Assignable CV input: Rise, rise & fall, fall, Gate outputs for rise and fall... More