Singer 107w102 vintage Irish embroidery sewing machine head & knee lifter

Description:

High quality brand new table top in vintage look Cut out for Singer 107w102 Irish embroidery machine . Vintage Oak wood painted Made in UK Shipping from UK More

Description:

This sturdy latch (Simanco 124387) and mounting screw is used to secure machines into their bases. Complete with its knurled screw and, just in case you need it, the screw which fits into the base to house the clamp. In need of a clean to fully... More

Description:

This came with a late 1950s 306K and I believe also fits 206K and 319K models but please be sure it is right for your machine. Plate is marked No 189631 and the spring 189625 Plate is in good order with just a few light typical marks needing only the... More

Description:

In good condition. Not an easy part to get hold of these days. Singer part #15359 I am always listing parts, tools and accessories for vintage Singer and other sewing machines. If there is anything you require you are most welcome to contact me and... More

Description:

My own stock photo but the one you will receive will be similar in every respect. I don't list these unless in excellent order, the most they will need, if at all, is a light wipe. This is the type with the black colour notched screw head. Fits several... More

Description:

Removed from 28K of 1900s vintage. As shown and as removed and would benefit from a clean. I believe these will fit some other models such as the VS, 128, but please be sure it is appropriate for your machine. Comes with the screw as shown. Does need a... More

Description:

Removed from an old VS 3/4 machine of 1897 vintage. As shown and as removed and would benefit from a clean. I believe these will fit some other models such as the 28, 128, but please be sure it is appropriate for your machine. Comes with the screw as... More

Description:

Removed from an old 28K of 1928 vintage (although these haven't changed much over the years). The parts are as shown and removed and are in good order, needing only an equally good clean. Fits several models however note that the wire thread guide is... More

Description:

Removed from an old 66K machine of 1919 vintage. The part is as shown and as removed and in good order with just light signs of being pre-owned and would benefit from a clean. I am always listing parts, tools and accessories for vintage sewing... More

Description:

My own stock photo but the one you will receive will be similar in every respect. I don't list these unless in excellent order, the most they will need, if at all, is a light wipe. Fits several vintage Singer models, 15, 27, 28, 66, 99, 185 etc but the... More

Description:

In good condition although in need of an equally good clean to remove old lint and grime. Recently removed from a 15k of 1910vintage. Teeth bright and sharp. I have included the bolt associated with it as shown in the pictures. I am always listing... More

Description:

Antique Singer VS2 Fiddle Base Treadle Sewing Machine Head with scrolls and small roses decals Serial Number: 8606005 manufactured around 1888 Good working condition It could be used as it was intended for sewing or upcycled as a small office ornament... More

Description:

Button foot Simanco 189648, fits in place of presser foot. Used for sewing on buttons in place of the standard presser foot. Hard to track down the exact spec for this but I'm pretty sure it fits all low shank models. This particular one came with a... More

Description:

In good clean condition and an original vintage piece with just a few minor historic marks. Simanco No 25527. Sorry about the use of flash affecting the quality of pics I think these fit most of the low shank models but please be sure it is the right... More