Trend Varijig Self Clamping Guide Squaring Attachment

Description:

Trend VJS/CG/SQA VJS/CG squaring attachment Allows Varijig clamp guide to be squared up more accurately. |Large 90 degree head allows the Varijig clamp guide to be used as a clamping T- square. Serrated front edge for grip. It is secured to fixed jaw... More

Description:

Feather board finger pressure accessory for Varijig clamp guides. Clamps to the Varijig clamp guide which can then be clamped to a router table top. Provides horizontal side pressure for safer table routing. Varijig clamp guide not included. Guard... More

Description:

Lever extension handle for Varijig clamp guides. Gives better leverage to operate the clamp, especially when more clamping pressure is required. Slides onto Varijig clamp guide lever. Increases lever length by 134mm. Varijig clamp guide not included. More

Description:

Feather board finger pressure accessory for Varijig clamp guides. Clamps to the Varijig clamp guide which can then be clamped to a router table top. Provides horizontal side pressure for safer table routing. Varijig clamp guide not included. Guard... More

Description:

Trend VJS/CG/24 Varijig clamp guide 24 inch For accurate guiding of router, saws and jigsaws. |Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.|Ideal for holding and clamping work pieces.|Aluminium extrusion... More

Description:

For accurate guiding of router, saws and jigsaws. Max clamp length 24 inches (610 mm) Min clamp length 1/2 inch (12.7 mm) Extrusion width 54mm Extrusion height 15.8mm Overall length 835mm Length fixed jaw to end of handle 125mm Length max position of... More

Description:

Trend VJS/CG/24 Varijig clamp guide 24 inch For accurate guiding of router, saws and jigsaws. |Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten.|Ideal for holding and clamping work pieces.|Aluminium extrusion... More

Description:

Trend VJS/CK Varijig system clamp kit (Pair) Pair of sliding friction clamps with 32mm clamping thickness. The clamp can be used with the Varijig system including the varijig set, straight guides and angle guide. Aluminium body. More

Description:

Lever extension handle for Varijig clamp guides. Length 180 mm Width 27 mm Thickess 9 mm More

Description:

Trend VJS/CK/L Varijig system Ex long clamp (Pair)Pair of sliding friction clamps with 51mm (2 inch) clamping thickness. To be used with the Trend Varijig Adjustable Frame System. More

Description:

Trend VJS/PCK/L Varijig ex-long pivot clamp (pair) Pair of pivoting sliding friction clamps with 51mm (2 inch) clamping thickness.|360 degree clamps Clamp rotates to allow the pad of the clamp to be secured firmly to the work-piece. The clamp can be... More

Description:

Variable angle guide for the router or saw. Adjustable angle guide to allow grooving with the router, or crosscutting with a circular saw. Adjustable angle range from 25 degree to 155 degree. Preset angle for 30, 45, 60, 90, 120, 135 and 150 degree.... More

Description:

Two lengths of extrusion with jointing piece to give a maximum working length of 100 inches (2540mm). Reduced length for easier transport and storage. Clamps can slide along each extrusion. Maximum material clamp thickness 32mm. Adjustable friction... More