Trend Trend SNAP/PHD/95 Snappy 9.5mm Pocket Hole Drill

Description:

CONSISTENT & TIGHT FIT: The Trend Pocket Hole Plug Cutter cuts parallel plugs 9.5mm in diameter and 52mm in length for a tight fit and clean finish once glued and cleaned back. VERSATILE USE: This plug cutter can be used on matching timber to disguise... More

Description:

Trend SNAP/PHD/95 Trend Snappy pocket hole drill 9.5mm 3/8 A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs. |Supplied with depth setting collar.|Can be fitted to the Quick Chuck or directly into the drill... More

Description:

Trend SNAP/PHD/95 Trend Snappy pocket hole drill 9.5mm 3/8 A 9.5mm (3/8 inch) diameter stepped High Speed Steel drill for use with Pocket Hole Jigs.Supplied with depth setting collar.Can be fitted to the Quick Chuck or directly into the drill... More

Description:

VERSATILE 5-PIECE SET: This Trend Snappy TCT Countersink Set includes 5 essential drill countersinks, covering Imperial screw gauges from No.4 through to No.12. TCT CUTTING TIPS: Designed with TCT (Tungsten Carbide Tip) cutting tips, these countersinks... More

Description:

This 9.5mm diameter stepped High Speed Steel drill bit is designed for use with Pocket Hole Jigs. This drill bit can be fitted to the Quick Chuck or directly into the drill chuck. More

Description:

This is a replacement pocket hole jig stepped drill bit. More

Description:

The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood giving strong instant joints. Solid hardened bushes with a variable pitch of 29 to 63mm. Use on timber MDF plywood and blockboard. It allows a variety of... More

Description:

PH/DRILL/95 Pocket Hole Jig Replacement Stepped Drill 9.5mm - Trend PH/DRILL/95, The Trend PH/JIG Pocket Hole Jig is great for fast and accurate joining of timber and plywood, giving strong instant joints. Solid hardened bushes with a variable pitch of... More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. 2.0mm. (5/64in)Countersink Size. No.4. More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size: 2.4mm (3/32in).Countersink Size: No.6. More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits. Drill Size. 2.0mm. (5/64in) Countersink Size. No.4. More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits.Drill Size. 2.8 mm (7/64in)Countersink Size. No.8. More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits. Drill Size: 2.4mm (3/32in). Countersink Size: No.6. More

Description:

The quick-release drill system for drilling, countersinking and screwing designed for use with Power Drills and Screwdrivers and is compatible with direct-drive 1/4in Hex Shank Power Bits. Drill Size. 2.8 mm (7/64in) Countersink Size. No.8. More