Makita B-67321 Circular saw blade 305 x 30 x 2.15 mm Number of cogs: 100 1 pc(s)

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 100; Product size (Ø): 305 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 80; Product size (Ø): 305 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 60; Product size (Ø): 305 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 45; Product size (Ø): 260 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 60; Product size (Ø): 260 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle: 10°; Bore diameter: 30 mm; Number of cogs: 80; Product size (Ø): 260 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Additional technical information: Tooth angle 23°; Bore diameter: 30 mm; Number of cogs: 24; Product size (Ø): 260 mm; Thickness: 2.15 mm; Tooth form: Efficut More

Description:

Perfect cuts in aluminum thanks to special tooth geometry · particularly long service life thanks to best carbide quality and fine-grained teeth · Precise, low-noise and vibration-minimized cuts through laser-etched expansion slots (and partly laser... More

Description:

Suitable for KGS 305. More

Description:

Universal use in demanding materials · For high demands on cutting quality, e.g. laminate, thin-walled plastic, aluminum, copper, brass profiles · Suitable for many applications in interior design · Good cutting results even in cross-sections in solid... More

Description:

Very wide range of applications in wood processing · For clean cutting results in longitudinal and cross-sections in soft and hard wood · Suitable for full and laminated wood, raw chipboard, coated or veneered, MDF, composite materials · Higher power... More

Description:

Easily clean cuts in all types of wood. 20 x 30 x 2.4 mm More

Description:

For table saw. The Makblade Plus Saw Blades Wade manner circular saws are based on a unique technology. Developed to a muted and a quiet running. A hardly vibrierendes saw blade for precise cutting guide and reduces a bending of the saw blade. The HM... More

Description:

For circular saws. An extensive range of hand-held circular saws for all manufacturers and models. A large selection of different sizes of 150 mm-355 mm diameter and of 10-60 teeth. From the rough longitudinal cut up to the exact cross-section is each... More

Description:

For lopping and mitre saws. The Makblade plus saw blades for lopping and mitre saws are based on a unique technology. Developed to a muted and a quiet running. A hardly vibrierendes saw blade for precise cutting guide and reduces a bending of the saw... More