FloPlast Mini Gutter Downpipe - 50mm x 2mtr Grey

Description:

Our 50mm Mini Gutter Downpipe comes in 2m lengths - the perfect length of drop for most sheds with minimal waste.Rainwater pipes are always a pushfit joint onto the running outlet or stopend outlet - never use silicon or solvent weld on these systems... More

Description:

Our 50mm Mini Gutter Downpipe comes in 2m lengths - the perfect length of drop for most sheds with minimal waste.Rainwater pipes are always a pushfit joint onto the running outlet or stopend outlet - never use silicon or solvent weld on these systems... More

Description:

67.5 Degree Branch ideal for garages, sheds, summer houses and most garden buildings. More

Description:

Use two of these bends to make a swan neck as required.For further information about this gutter system please visit our Mini Gutter Guides and Tips section. More

Description:

67.5 Degree Branch ideal for garages, sheds, summer houses and most garden buildings. More

Description:

The shoe is the fitting used at the bottom of the downpipe when it is not being connected to a drainage pipe or gully.The shoe should be angled so that the open section faces away from the shed or building.Installation is a simple push fit joint. If... More

Description:

Use two of these bends to make a swan neck as required.For further information about this gutter system please visit our Mini Gutter Guides and Tips section. More

Description:

Offset bends are commonly used to form what is known as a swan neck. This is the term given for two offset bends used together with a small piece of pipe in between that allows the downpipe to drop from the fascia and return to the wall below the... More

Description:

Offset bends are commonly used to form what is known as a swan neck. This is the term given for two offset bends used together with a small piece of pipe in between that allows the downpipe to drop from the fascia and return to the wall below the... More

Description:

Offset bends are commonly used to form what is known as a swan neck. This is the term given for two offset bends used together with a small piece of pipe in between that allows the downpipe to drop from the fascia and return to the wall below the... More

Description:

Mini Gutter 92.5 Degree Bend - White More

Description:

The 50mm Anthracite Grey 112.5° MiniFlo Downpipe Offset Bend is used for for making a 112.5° swan neck / offset from downpipe outlet to the wall. A smaller profile based on the original round line system it is an ideal solution for garages sheds... More

Description:

The 50mm Anthracite Grey MiniFlo Downpipe Socket is used for joining 2 MiniFlo downpipes with a push-fit connection no glue or mastic required for installation. A smaller profile based on the original round line system it is an ideal solution for... More

Description:

The 50mm Anthracite Grey 92.5° MiniFlo Downpipe Offset Bend is used for for making a 92.5° swan neck / offset from downpipe outlet to the wall. A smaller profile based on the original round line system it is an ideal solution for garages sheds... More