Radial Engineering Pro AV2

Description:

Radial Engineering SGI, Studio Guitar Interface, For bridging long cable paths between guitar and amp, Consists of 2 modules (Input - Output), XLR in/out + Jack in/out, Incl. 15 V DC power supply More

Description:

Radial Engineering Pro D2, Passive Stereo DI Box, 2 Independent ProDI channels, 15 dB pad, Frequency response: 20 Hz - 18 kHz, Ground lift, Connections: Jack in / out, XLR out, Ideal for stereo sources such as keyboards, drum computers and digital... More

Description:

Radial Engineering EXTC-SA, Guitar Effect Router, Balanced re-amper, XLR in / out, Jack in / out, 2x jack loop in / out, Send and return separately adjustable, Wet / Dry adjustable, 180 ° Phase Invert switchable, Including external power supply 15 V... More

Description:

Radial Engineering Pro AV1, Single-channel, Passive DI Box, With integrated stereo to mono mixdown, 6.3 mm jack for instruments, Jack thru, 3.5 mm jack and RCA connectors for -10dB consumer hardware, XLR Input, Balanced XLR out More

Description:

Radial Engineering EXTC-Stereo, 2-Channel Stereo Interface for Guitar Effects (Stand-Alone), Frequency range: 20 - 20000 Hz, Inputs and outputs: Jack/XLR combo, Steel chassis, Incl. 15 V DC power supply More

Description:

Radial Engineering SGI, Balanced Line Driver System for Guitar and Bass, For balanced transmission of an instrument signal without noise or signal loss over distances of up to 100 metres, Consists of SGI RX receiver and SGI TX transmitter, SGI TX:... More

Description:

Radial Engineering SW-8, 8-Channel line level auto switcher, Redundant backup switch, For live applications from previously recorded backing tracks, Switches to a second backup multi-track system if an error occurs in the main path., Silent... More

Description:

Radial Engineering Trim-Two, Passive Stereo DI Box, With adjustable input level, Frequency range: 30 - 20,000 Hz, Input: 2 x 6.3 mm jack, 2 x RCA and 1 x 3.5 mm stereo mini jack, Output: 2 x XLR (L/R), Switchable ground / lift, Mono switch, Sturdy... More

Description:

Radial Engineering JCR, Studio Re-Amping Box for Bass / Guitar Amps, 1 x XLR in, 1 x Jack in, 1 x Jack out, Phase reverse, Ground lift, Switchable filter: flat, highpass, lowpass, Switchable mute, Adjustable level, Robust metal housing, Colour: Black More

Description:

Radial Engineering StageBug SB-6, Stereo Isolator, Eliminates hum caused by ground loops, For balanced and unbalanced signals, Linear frequency response from 20 - 20,000 Hz, 2x 6.3 mm Jack inputs, 2x 6.3 mm Jack outputs, Switchable ground lift for... More

Description:

Radial Engineering J 48 Stereo, Active 2-Channel DI Box, Jack In and Thru, XLR out, Switchable low cut, -15 dB pad and phase reverse, Ground lift, Requires 48 V phantom power More

Description:

Radial Engineering JDI Stereo, Passive Stereo DI Box, 6.3 mm Jack input, 6.3 mm jack thru, XLR output, Switchable -15 dB pad, Switchable ground lift, Jensen transformer, Robust metal housing More

Description:

Radial Engineering 4Play, DI Box with Switching Function, Multi-output DI box, Fast switching between four outputs with just one footswitch, 4 XLR outputs for full control over 4 instruments, Prevents ground loops, Mute button for quiet cable... More

Description:

Radial Engineering Gold Digger, 4-Channel Microphone Mixer, For comparing up to four microphone signals on one preamp, Adjustable trim per channel, Switchable 48 V phantom power per channel, On/off switch per channel, Operation with external power... More