Thon Accessory Case 2x3 Boxes PB

Description:

Thon Accessory Case 2x3 Boxes BR, Accessory Case, Ideal for sorting cables and small stuff on stage, 2 x 3 Compartments, Material: 9 mm Multiplex, 30 x 30 mm Aluminium edges, 2 Spring-loaded medium-sized butterfly latches, 8 x Folding handles, Heavy... More

Description:

Thon Accessory Case 1x3 Boxes PB, Accessory Case, Ideal for sorting cables and small stuff on stage, Made of 7 mm polyboard plastic, 30 x 30 mm Aluminium edges, 2 Spring-loaded medium-sized butterfly latches right, 4 Folding handles, Left hinge, Large... More

Description:

Thon Dividing Wall set for 2x3 PB - custom-made dividers for accessory case 2x3 box and 1x3 box, set consists of two transverse and two longitudinal dividers, made of 9 mm polyboard, rounded edges, division in 5 and 7 cm increments, dimensions (WxDxH)... More

Description:

Thon Accessory Case 54x21x33 PB, Universal Cable Case, 7 mm Polyboard, 25 x 25 mm Aluminium edge, 1 Case handle, 2 Drawbolts, 2 Locking hinges, Medium ball corners, Inner dimensions (W x H x D): 54.5 x 21 x 33.5 cm, Outer dimensions (W x H x D): 58.5 x... More

Description:

Thon Accessory Case 60x40x40 PB, Accessory Case, 7 mm Polyboard, 30 x 30 mm Aluminium edges, 4 Medium ball corners, 4 Ball corners, stackable at the bottom, 2 Spring-loaded butterfly latches, 4 Folding handles (heavy), Large locking hinges, Inner... More

Description:

Thon Accessory Case 60x30x30 PB, Accessory Case, Made of 7 mm polyboard, 30 x 30 mm Aluminium edges, 4 Medium-sized rounded ball corners, 4 Rounded ball corners stackable at the bottom, 2 Spring-loaded butterfly latches, 2 Folding handles (heavy),... More

Description:

Thon Dividing Wall set for 2x3, Dividing Wall for Accessory Case 2x3 Box, Custom-made partitions for accessory case 2x3 box and 1x3 box, Set consists of two transverse and two longitudinal partitions, From 9 mm Multiplex, Rounded edges, Division in 5... More

Description:

Thon Accessory Case 1x3 Boxes BR, Accessories Case, Ideal for organising cables and small items on stage and FOH, Made of 9 mm multiplex, 30 x 30 mm Aluminium edges, 2 Medium-sized spring-loaded butterfly latches on the right side, 4 Folding handles,... More

Description:

Thon Microphone Flight Case 14 PB, Microphone Flight Case, For 14 microphones, 7 mm Polyboard, 22 x 22 mm Aluminium edge, 1 Case handle, 2 Drawbolts, 2 Locking hinges, Small ball corners, Additional accessory compartment, Interior dimensions (W x H x... More

Description:

Thon Flex Cut Universal Case 1 PB, Universal Case, Due to a special foam (15 mm x 15 mm cubes) the inside dimensions can be varied, Made of 7 mm polyboard, 22 x 22 mm aluminium edge, 1 Case handle, 2 Drawbolts, 2 Hinges, Small ball corners, Removable... More

Description:

Thon Mixer Case A&H ZED60-14FX PB, Custom-made Case, For Allen & Heath ZED60-14FX, Made of 7 mm polyboard plastic, Aluminium edge: 25 x 25 mm, With foam padding, 2 Spring-loaded butterfly latches, medium, 1 Strap handle, Steel ball corners, Rubber... More

Description:

Thon Case Yamaha MG16/20 XU PB, Flight Case, Custom-made for Yamaha MG16 and MG20 XU, Made of 7 mm polyboard plastic, Aluminium edge: 22 x 22 mm, With foam padding, 2 Drawbolts, 2 Lift-off hinges, 1 Case handle, Steel ball corners, Space for cables:... More

Description:

Thon Case Line6 Helix LT PB, Flight Case, Suitable for the Line6 Helix LT Guitar Processor, Made from 7 mm Polyboard plastic, 22 x 22 mm aluminium edge, 2 Butterfly latches, 1 x Case handle, Steel ball corners, 4 Rubber feet, Cable channel:... More

Description:

Thon Whiskey Case PB, Whiskey Case, With matching foam inlay for one 0.7 l bottle of Jack Daniel's and two 0.5 l bottles of cola (drinks not included), Made of 7 mm polyboard, 22/22 aluminium edge, 2 Clip locks, 1 Chrome-plated case handle, 2 Locking... More