Maintronic AV30ec Mi Installation Amp

Description:

Maintronic AV30ec Installation Amplifier, Digital amplifier for top hat rail mounting, 2x 15 / 10 W / 4 Ohm / 8 Ohm or 1x 30 W / 8 Ohm, Ideal for small permanent installations in the POS, museums, Power supply from 12 - 24 V, Balanced and unbalanced... More

Description:

Maintronic AV30 100V Mi AmplifierDIN-Rail, Digital ELA 100V Amp for top hat rail mounting, Power: 1x 25 Watt, Ideal for small fixed installations in the area of ELA, POS, museums, Power supply from 12-24 Volt, Balanced inputs, Summing amplifier at... More

Description:

Maintronic DPA 500/48V, Digital 100 V-Ela Power Amplifier, 2x 250 W RMS, Only 9 W in standby mode, 90% Efficiency, DIN EN 60849 / VDE 0828, Adjustable bass, Treble and volume, 90 - 20,000 Hz, Switch-on delay, Integrated limiter and overheating... More

Description:

Maintronic AV32 Amplifier Remote, Digital stereo amplifier for DIN rail - Remote, 2x 15 / 10 W / 4 Ohm / 8 Ohm or 1x 30 W / 8 Ohm, Ideal for small permanent installations in the POS, museums, Power supply from 12 - 24 V, 4 Balanced inputs and 1 x mic... More

Description:

Palmer MI Pocket Amp Acoustic, Portable Preamp, For acoustic string instruments with piezo and magnetic pickups, Three selectable basic sounds: Flat, Modern and Vintage, Input limiters, polarity selector and notch filters, 3-Band EQ with... More

Description:

Maintronic AV30 100V Amplifier Hutschiene, Digital ELA 100 V Amp for top hat rail mounting, 1x 25 W, Ideal for small fixed installations in the area of ELA, POS, museums, Power supply from 12 - 24 V, Balanced inputs, Summing amplifier at input,... More

Description:

the t.amp E-400, Stereo Power Amplifier, With low rack installation depth of just 308 mm, Power: 2x 190 W at 4 Ohm, 2x 120 W at 8 Ohm, 1x 380 W at 8 Ohm bridged (@1 kHz, THD <= 0.1%), Frequency range: 20 - 20,000 Hz, Damping factor: >120, Inputs: XLR,... More

Description:

the t.amp D4-500, Digital Amplifier, Class D, 4 x 500 W @ 4 O, 4 x 250 W @ 8 O, Frequency range: 20 Hz to 20 kHz, Connections: XLR inputs, speaker twist out, Temperature controlled, Low rack installation depth (only 240 mm), Design: 19"/ 1 U, Weight:... More

Description:

Sirus I-Amp 1. 300T - 1-channel installation amplifier, 1x 300 watts @ 70/100V (RMS), Class-D amplifier; ideal for installations; protection circuits such as thermal, short circuit, on/off mute; Euroblock input and output, front volume controls and... More

Description:

LD Systems Curv 500 IAMP, 4-Channel Class-D Power Amplifier, Especially suitable for CURV 500 installations, 4 x 240 W at 4 ohms, 4 x 120 W at 8 ohms, 4 x 60 W at 16 ohms, Frequency range: 10 - 22,000 Hz, Each channel can control up to six CURV-500... More

Description:

QSC GXD 4, Power Amplifier, Very low installation depth: 259 mm, Power: 2x 600 W into 4 Ohm, 2x 400 W into 8 Ohm, Hi-Peak power: up to 1,600 W, Class-D power amplifier circuit, Large, illuminated 256p x 128p LC display, 2 Rotary input knobs and 3... More

Description:

The PPA series is a series of 100V amplifiers with 8 ohms 70V and 100V outputs characterized by easy use excellent performance and reliability and is therefore particularly suitable for a wide range of small and medium-sized installations. This range... More

Description:

The PPA series is a series of 100V amplifiers with 8 ohms 70V and 100V outputs characterized by easy use excellent performance and reliability and is therefore particularly suitable for a wide range of small and medium-sized installations. This range... More

Description:

ART SLA 4, Amplifier, 4 x 100 W at 8 Ohm, 4 x 140 W at 4 Ohm, 6.3 mm jack or Euroblock for the input signal, Binding post for the output, Built-in fan, Installation depth approx. 34 cm, Format: 19"/ 1 U, Weight: 9 kg More