Schoeps W5D

Description:

Schoeps AMS22, Elastic suspension holder, For MS stereo method, For 20 mm microphones (CMC with capsule) More

Description:

Schoeps W 140 L, Foam Windscreen, Suitable for CMIT 5, Wind noise attenuation at 18 km / h 18 dB-A, Length: 140 mm, Diameter: 41 - 50 mm, Colour: Anthracite More

Description:

Schoeps B20, Small close-speech guard, Made of washable nylon fabric, Wind noise attenuation at 18 km/h with bullet microphones: 25 dB-A, With supercardioid microphones: 26 dB-A, Diameter 50 mm, Colour: Grey, Not suitable for the following types: MK... More

Description:

Schoeps W 20 RI, Microphone Outdoor Protection, Consisting of wind shield R1 and W 20 R Wind protection basket W 20 R, Wind noise attenuation at 18 km / h with balls 43 dB-A, with a supercardioid 51 dB-A, Diameter: 90 mm, Colour: grey More

Description:

Schoeps TC, Table Microphone Stand, Noble inconspicuous table stand, For all microphone mounts with 3/8" thread, Cable guide, Structure-borne sound insulation, Detachable intermediate piece, Colour: Grey More

Description:

Schoeps A20 S Elastic Mount, Elastic Shock Mount, Simple design, For 20 mm microphones (CMC with capsule), Colour: Grey More

Description:

Schoeps A20 Elastic Suspension, Elastic SuspensionThe use of the A 20 is especially recommended when it comes to high structure borne noise suppression, such as when using the microphone preamplifier CMC with capsule on a boom.@+@+For microphones using... More

Description:

Schoeps B5, PopscreenIt is sufficient for medium-to-high speakers to protect the cardioid and other pressure gradient receivers, especially when they are speech microphones. For bullets it is sufficient even in low winds. Very low sound.@+@+,... More

Description:

Schoeps STR 350, Stand Tube@+These stand tubes have a 3/8" threaded pin at the top and a 3/8" female thread at the bottom. Therefore, several rods can be screwed together. They also fit into the collets of the bottom leg BF 250.@+@+@+The included gray... More

Description:

Schoeps SGc, Stand clamp, With joint, With clamp made of grey plastic, For compact microphones More

Description:

Schoeps STR 1000, Stand Tube, For BF 250, Length: 1000 mm More

Description:

Schoeps SGCM, Stand Clamp, With joint, With metal clamp, For compact microphones More

Description:

Schoeps HC 3, Miniature Suspension Device, Fastening takes place on the suspended cable, Suitable for cables with 3 mm diameter, Incl. SGC stand joint More

Description:

Schoeps B5 D, Hollow Foam Popscreen B 5 D@+For use especially on pressure-gradient transducers in light wind and as a close-speech guard. The B 5 D offers good effectiveness, yet has only a slight influence on the sound. It is made of foam but is... More