Waveshare Tri-color 7.5inch E-Paper Display HAT Module 800×480 E-ink Three-Color Paper Screen for Raspberry Pi/Jetson Nano SPI Interface with ESP32 Driver Board(WiFi/Bluetooth)

Description:

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Provides Android APP, allows to refresh display content via Bluetooth EDR Supports... More

Description:

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Universal e-Paper Driver Board with WiFi / Bluetooth SoC ESP32 onboard, supports various... More

Description:

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Come with e-Paper ESP8266 Driver Board (WiFi) allows to display image from PC/smart phone... More

Description:

This is an E-Ink raw display, 7.5inch, 880×528 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle,... More

Description:

Comes with a driver board, easily connect for Raspberry Pi 5/4B/3B/Zero/Zero W/Zero 2W/Pico/Pico W/Pico WH, also fits Arduino/Jetson Nano/Nucleo No backlight, keeps displaying the last content for a long time even when power off, ultra low power... More

Description:

This product has been updated to V2 with 800 x 480 resolution (the V1 has a resolution of 640 x 384). The hardware structure and interface of V2 are for the V1, but the software needs to be updated. If you purchase it for the first time, and there... More

Description:

Waveshare 7.5inch E-Ink display HAT 800x 480 E-paper Module Black White, SPI No Backlight for Raspberry Pi 2B/3B/3B+/Zero More

Description:

Raspberry Pi 7.5 inch e-Paper E-Ink Display HAT 7.5inch SPI Interface 800×480 Red / Black / White for Arduino STM32 Jetson Nano More

Description:

Raspberry Pi 7.5inch e-Paper E-Ink Display HAT SPI Interface 800×480 Black / White for Arduino STM32 Jetson Nano More

Description:

This is an E-Ink display module, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Onboard voltage translator, compatible with 3.3V/5V MCUs Due to the... More

Description:

800X480, 7.5inch E-Ink Raw Display, SPI Interface, Without PCB This is an E-Ink raw display, 7.5inch, 800X480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption, wide viewing... More

Description:

GooDisplay 7.5inch E Paper Screen Module 4-Grayscale E-Ink Display HAT 800x480 Resolution1.5s Fast Refresh SPI GDEY075T7 More

Description:

No backlight, keeps displaying last content for a long time even when power down Ultra low power consumption, basically power is only required for refreshing Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards,... More

Description:

This is an E-Ink raw display, 4.2inch, 400x300 resolution, with embedded controller, communicating via SPI interface, supports red, black, and white three-color display. Due to the advantages like ultra low power consumption, wide viewing angle,... More

Description:

Note:Version 2 please use corresponding demo code in wiki.This is an E-Ink display HAT for Raspberry Pi, 7.5inch, 800×480 resolution, with embedded controller, communicating via SPI interface. Due to the advantages like ultra low power consumption,... More