Doepfer A-190-3 Vintage Edition

Description:

Doepfer A-155 Vintage Edition, Analogue and Trigger Sequencer, Vintage edition with black front plate, 2 Switch rows with 8 steps each, Euro rack format, Width: 50 HP, Depth: 40 mm, Power consumption: +80 mA (+12V)/ -20 mA (-12V) More

Description:

Doepfer A-154 Vintage Edition, Sequencer Controller Module, Vintage edition with black front plate, Expansion module for A-155 (Article Nr #154958#), Different operating modes, LED display, 8 or 16 sequencer steps, Controls up to 2x A-155 (2x A-155... More

Description:

Doepfer A-110-1 Vintage Edition, VCO, Standard VCO for the A-100 modular system, Black front panel, Width: 10 HP / 50.5 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +90 mA (+ 12V) / -20 mA (-12V) More

Description:

Doepfer A-147-2 Vintage Edition, Voltage controlled delayed low frequency oscillator, Voltage Controlled Delayed Low Frequency Oscillator, Module consists of Voltage Controlled Low Frequency Oscillator (LFO) and Voltage Controlled Amplifier (VCA),... More

Description:

Doepfer A-130-8 Vintage Edition, Eurorack Module, Octal Linear VCA, 8 VCAs with linear characteristic for audio and control signals, Sum outputs for VCA groups 1-4, 5-8 and 1-8, Current: 50 mA (+12V) / 50 mA (-12V), Width: 6 HP, Depth: 40 mm, Black... More

Description:

Doepfer A-111-2 Vintage Edition, Eurorack Module, High-End VCO II / VCLFO, Precise tracking over 10 octaves, Wide frequency range: 0.5 Hz - 20 kHz in VCO mode, 0.001 Hz - 40 Hz in LFO mode, Selector switch for LFO or VCO mode, CV inputs with... More

Description:

Doepfer A-138b Vintage Edition, Mixer Module, Mixers with logarithmic potentiometers, Primarily for mixing audio signals, Vintage edition with black front panel, Width: 8 HP, Depth: 35 mm, Current consumption: +10mA (+12V) / -10mA (-12V) More

Description:

Doepfer A-111-5 Vintage Edition, Eurorack Module, Complete monophonic synthesizer voice, VCO with sawtooth, pulse and triangle waveforms, Adjustable pulse width, PWM CV input with attenuator, FM via LFO1 or ADSR envelope, VCO frequency range:... More

Description:

Doepfer A-178 Theremin Vintage Edition, Theremin Module, Generates variable control voltage by bringing the hand closer to the antenna, Distance range: approx. 30 cm, Max. output voltage: +10V, Eurorack format, Current: +60 mA (+12 V) / -20 mA (-12... More

Description:

Doepfer A-188-1D Vintage Edition, Brigade device module, Vintage edition, 4096 BBD stages, For the A-100 modular system, Black front panel, Width: 14 TE / HP, Depth: 60 mm, Power requirement: +80mA (+12V) / -60mA (-12V) More

Description:

Doepfer A-110-6, Eurorack Module, Trapezoid Thru Zero Quadrature VCO, Uses quadrature trapezoid as the fundamental waveform, Features linear Thru Zero frequency modulation and quadrature outputs for all waveforms (two 90 degree out of phase signals... More

Description:

Doepfer A-138a Vintage Edition, Mixer Module, With linear potentiometers (mainly suitable for mixing control voltages), Vintage edition with black front panel More

Description:

Doepfer A-101-6, Six Stage Opto FET VCF, New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA More

Description:

Doepfer A-162, Dual Trigger Delay, Allows delayed output of the input signal, Power requirement: +40 mA (+ 12V) / -0 mA (-12V), Width: 8 HP / 40.3 mm, Depth: 45 mm (measured from the back of the front panel) More