Doepfer A-100P9 Case PSU3

Description:

Doepfer A-100LMS9 PSU3 Low Cost Case, Module Housing, Low Cost Case made of untreated wood, 9 U / three module rows, Width: 168 TE, 2 Built-in A-100PSU3 power supplies: +12V/4000 mA, -12V/2400mA, +5V/8000mA, Useful depth for modules: 110 mm (80 mm... More

Description:

Doepfer A-100 LC6 Case 6HE PSU3, Original Doepfer case, Untreated (no paint and/or lacquer) body constructed from "raw" wood, External dimensions: approx. 445 x 275 x 160 mm, Interior dimensions: approx. 2x 84 HP x 3 U, Usable depth for A-100... More

Description:

Doepfer A-100 PMS 9 PSU3, Empty Housing for Eurorack Modules, 168 HP / 9 U, 100 - 240 V, 2 Built-in A-100PSU3: +12 V / 4000 mA, -12 V / 2400 mA, +5 V / 8000 mA, 6 Doepfer A-100 V6 Bus Boards with slots for up to 132 modules, Usable depth for... More

Description:

Doepfer A-100P6 Case PSU3, Case with base frame, Two rows with 84 HP each for installing modules, 2x 3 H3, Dimensions: approx. 465 x 330 x 170 mm, Usable depth for A-100 modules: approx. 70 mm in the power supply area (lower right), otherwise... More

Description:

Doepfer A-110-6, Eurorack Module, Trapezoid Thru Zero Quadrature VCO, Uses quadrature trapezoid as the fundamental waveform, Features linear Thru Zero frequency modulation and quadrature outputs for all waveforms (two 90 degree out of phase signals... More

Description:

Doepfer A-100BS2-P9 PSU3, Analogue Modular System - Portable Suitcase Version, Basic system with PSU3 power supply (12V / 2000mA, 12V / 1200mA 100 - 230 V), Installed modules and bus boards, Overall dimensions (W x H x D - with lid and rubber feet):... More

Description:

Doepfer A-100PB PSU3, Substructure housing for modules, 2x 84 HP, With PSU3 power supply: +12 V / 2000 mA, -12 V / 1200 mA, +5 V / 4000 mA, 100 - 230 V, Removable lid with carrying handle, Steel ball corners, Max. depth for modules in the front row:... More

Description:

Doepfer A-100LMB PSU3 Monster Base, Module Housing, Low Cost Monster Base made of untreated wood, 6 U / Two modular rows, Width: 168 TE, 2 Built-in A-100PSU3 power supplies: +12V/4000 mA, -12V/2400mA, +5V/8000mA, Useful depth for modules: 65 mm in... More

Description:

Doepfer A-101-6, Six Stage Opto FET VCF, New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA More

Description:

Doepfer A-162, Dual Trigger Delay, Allows delayed output of the input signal, Power requirement: +40 mA (+ 12V) / -0 mA (-12V), Width: 8 HP / 40.3 mm, Depth: 45 mm (measured from the back of the front panel) More

Description:

Doepfer A-100 PMS 12 PSU3, Monster Case, 168 HP / 12 U, 100 - 240 V, Max. current output: 4x A-100PSU3, - +12 V / 8000 mA, -12 V / 4800 mA, +5 V / 16000 mA, External dimensions when closed with lid (W x H x D): approx. 90 x 62 x 23 cm (18 cm without... More

Description:

Doepfer PK88 GH without Case, Master Keyboard*Built-In Version Without Housing*@+@+, Hammer Action, 88 Keys, Graduated Hammer Keyboard (TP / 40GH), USB port, 1x MIDI Out, Connection for double footswitch, Includes power supply More

Description:

Doepfer LMK2+ 88 GH without Case, Master Keyboard*Built-in version without housing*@+@+, Graduated 88 keys hammer keyboard (TP / 40GH), After touch, 3-Digit seven-segment display, 8 Buttons with LEDs, Pitchbend and modulation wheel, Foot Controller... More

Description:

Doepfer A-100 LC1 Low Cost Case VE, Empty Housing for Eurorack Modules, Built-inpower supply A-100SSB (+ 12V/340 mA, -12V/340 mA), 48 HP version of the A-100LC3, Built-in bus board with 12 module slots, IEC socket on the back side, Internal... More