Befaco MIDI Thing V2

Description:

Befaco CV Thing, Eurorack module, Programmable CV to MIDI interface, 8 CV inputs, each assignable to MIDI messages such as CC, Notes, Program Change, NRPN and Clock, Configurations can be saved, USB-B port (class compliant) and MIDI-TRS socket for MIDI... More

Description:

Befaco Rampage, Eurorack Module, Dual function generator, Numerous application possibilities such as AD envelope, ASR envelope, VCO, low-pass filter, LFO, slew limiter, comparator and more, 2 Channels with fader for rise and fall, trigger button,... More

Description:

Befaco Burst, Eurorack Module, Voltage controllable burst generator, Generates a sequence of up to 64 trigger pulses that can be set in number, distribution, probability and multiplication / division, All parameters CV controllable, Burst loop... More

Description:

Befaco Chopping Kinky, Eurorack Module, Voltage controllable dual wave-folder, Two independent channels with adjustable wave-folding intensity, 2 CV inputs per channel (1x with bipolar attenuator), Chop output can switch between both output signals... More

Description:

Befaco Lich, Eurorack module, Programmable multifunctional module, Based on the OWL platform from Rebel Technology, Pre-installed patches: Silky Reverb, Harmonic Oscillator, Tap Tempo Delay, MIDI to CV interface, 4 assignable control knobs and 2... More

Description:

Befaco 7U Case, Aluminum Eurorack Case, 36 Slots for Eurorack modules, Rear connections: 6x 6.3 mm jack (balanced or unbalanced) for audio and CV signals, MIDI In/Out/Thru (5-pin DIN), USB-B port and 2x USB-A port for powering other devices,... More

Description:

Befaco Muxlicer, Eurorack module, Signal processor with bidirectional switch and gate generator, Consists of the sections step controller, gate generator and analogue switch, Muxlicer can be used as a voltage-controlled signal router (8-on-1 or... More

Description:

Befaco A*B+C, Eurorack Module, Dual four-quadrant multiplier, Use as 4-channel mixer, ring modulator, voltage-controlled polariser, VCA, offset generator or adjustable voltage source, Power requirements: +40 mA (+12 V) / -40 mA (-12 V), Width: 6 HP,... More

Description:

Befaco Mixer, Eurorack Module, Analogue mixer for audio and CV signals, 4 Inputs with level control, Normal mix output and inverted output, Peak LED, Power requirements: +14 mA (+12 V) / -11 mA (-12 V), Width: 5 HP, Depth: 50 mm More

Description:

Befaco I4 Instrument Interface, Eurorack module, Preamplifier for microphone, line and instrument signals, +48 V Phantom power, switchable, Impedance selector switch, Envelope follower with adjustable attack and release time, Gate and trigger extractor... More

Description:

Befaco 1U STMix, Compact Stereo Mixer, 4 Channels with volume control and stereo/mono input, Stereo output with peak LEDs, Can be used as submixer for Befaco Hexmix (Art.#466973#), Current consumption: 30 mA (+12 V) / 30 mA (-12 V), Width: 28 HP,... More

Description:

Befaco Pony VCF, Eurorack Module, Analogue low-pass filter with 3-channel mixer and VCA, Mixer with 3 audio inputs, level display and normalised feedback loop on channel 3, Low-pass filter with controls for cutoff and resonance, No level loss at high... More

Description:

Befaco Even VCO, Eurorack Module, Analogue voltage controlled oscillator, Cleanly tuneable over a range of 10 octaves, Rotary switch for octave selection and controls for tune and PWM, CV inputs for pitch, FM, sync and PWM, Waveform outputs: Sine,... More

Description:

Befaco VC ADSR, Eurorack Module, Analogue envelope generator, Fader for attack, decay, sustain and release, CV input to control each envelope stage, Gate output for each envelope stage, Characteristic can be adjusted from logarithmic to linear to... More