1-30
of
17,602
results
Sort by
-
Meinl PM-2 Pedal Mount CymbalMeinl PM-2 Pedal Mount Cymbal, Pedal Mount for Cymbal, Cymbal holder for playi... Meinl PM-2 Pedal Mount Cymbal, Pedal Mount for Cymbal, Cymbal holder for playing with standard pedals, Adjustable height, For cymbals from 16" to 22" in size, Twist-off tips at the bottom of the feet for better grip moreDetails
-
Millenium DA-250/257 Percussio...Millenium DA-250/257 Percussion Holder, Double Percussion holder, To screw ont... Millenium DA-250/257 Percussion Holder, Double Percussion holder, To screw onto tripods, Multi clamp with two angled support rods 9.5 x 240 mm moreDetails
-
Kelly Shu Bass Drum Composite ...Kelly Shu Bass Drum Composite Mount, Bass Drum Microphone Holder System, Mater... Kelly Shu Bass Drum Composite Mount, Bass Drum Microphone Holder System, Material: Plastic, No loss of space due to microphone stand, Suspended by rubber bands without contact in the bass drum, The system isolates all step or stage vibrational noises,... moreDetails
-
Jaspers Holder 40SJASPERS Holder 40S, Holder, Length: 40 cm, With stoppers and two-part tube cla... JASPERS Holder 40S, Holder, Length: 40 cm, With stoppers and two-part tube clamps, Load capacity: Up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included), Can be mounted at any location without dismantling stand,... moreDetails
-
Vandoren Optimum Pressure Plat...Vandoren Optimum Pressure Plates Clarin, Spare Pressure Plates, Suitable for O... Vandoren Optimum Pressure Plates Clarin, Spare Pressure Plates, Suitable for Optimum ligature B- clarinet and Eb- alto clarinet, Plate no. 1: Great resonance with rich, sonorous tones, runs in the same direction as the fibers of the reed, which results... moreDetails
-
Gibraltar SC-101 HH Tambourine...Gibraltar SC-101 HH Tambourine Holder, Hi-hat tambourine holder, For attaching... Gibraltar SC-101 HH Tambourine Holder, Hi-hat tambourine holder, For attaching a hand tambourine to the rod of the hi-hat drums moreDetails
-
Pearl PCS-10 Percussion HolderPearl PCS-10 Percussion Holder, Percussion holder, This simple product can be ... Pearl PCS-10 Percussion Holder, Percussion holder, This simple product can be bolted to any 3/8" holder, It allows additional attachments e.g. a cowbell, jam block, etc., This percussion holder can be screwed horizontally and vertically at all angles moreDetails
-
Eich Amplification RackmountEich Amplification Rackmount, Mount Kit, For installing Eich amplifiers in a 1... Eich Amplification Rackmount, Mount Kit, For installing Eich amplifiers in a 19 "rack, Compatible with T-300 (Art.#386890#), T-500 (Art. #386893#), T-900 (Art. #386897#) & Rocket 500 (Art. #386900#), Material: powder-coated metal, Including screws moreDetails
-
Sonor ZS1 Holder Xylo/MetalloSonor ZS1 Holder Xylo/Metallo, Holding Pins for all Box Bar Playing, For xylop... Sonor ZS1 Holder Xylo/Metallo, Holding Pins for all Box Bar Playing, For xylophones, metallophones, etc., Colour: Black, Shipping quantity: 10 Pieces moreDetails
-
Thomann Pressed Cork Plate 3,0...Thomann Pressed Cork Plate 3,0 mm, Pressed Cork Plate, Thickness: 3.0 mm, Size... Thomann Pressed Cork Plate 3,0 mm, Pressed Cork Plate, Thickness: 3.0 mm, Size: 300 x 100 mm, Fine quality moreDetails
-
Intellijel Designs 7U Case Joi...Intellijel Designs 7U Case Joiner Plates, Metal Connector, For 2 Intellijel 7U... Intellijel Designs 7U Case Joiner Plates, Metal Connector, For 2 Intellijel 7U cases, Easy assembly due to snap-in mechanism in case moreDetails
-
Pearl PPS-82 Multi Percussion ...Pearl PPS-82 Multi Percussion Holder, Percussion Holder, 4-Way adjustable adap... Pearl PPS-82 Multi Percussion Holder, Percussion Holder, 4-Way adjustable adapter for mounting percussion instruments onto stands, cymbal stands, microphone tripods etc., Length: 45.7 cm moreDetails
-
Jaspers Holders 70SJaspers Holders 70S, Holder, Length: 70 cm, Load capacity: up to 15 kg (extend... Jaspers Holders 70S, Holder, Length: 70 cm, Load capacity: up to 15 kg (extendable with shelf reinforcement for up to 40 kg load capacity - not included in the delivery), With stoppers and two-piece tube clamps, Can be mounted at any position without... moreDetails
-
Meinl CSM-M Cajon Side MountMeinl CSM-M Cajon Side Mount, Cajon Side Mount, Material: Rubber tree (Hevea b... Meinl CSM-M Cajon Side Mount, Cajon Side Mount, Material: Rubber tree (Hevea brasiliensis Muell.-Arg.), Colour: Black, Size: M, The Cajon side mounts have been specially designed to let you attach Cajon accessories as close to the playing surface as... moreDetails
-
Meinl CSM-L Cajon Side MountMeinl CSM-L Cajon Side Mount, Cajon Side Mount, Material: Rubber tree (Hevea b... Meinl CSM-L Cajon Side Mount, Cajon Side Mount, Material: Rubber tree (Hevea brasiliensis Muell.-Arg.), Colour: Black, Size: L, The Cajon side mounts have been specially designed to let you attach Cajon accessories as close to the playing surface as... moreDetails
-
Jaspers Holders 16BJaspers Holders 16B, Holder for Keyboard Stand, Length: 16 cm, Load capacity: ... Jaspers Holders 16B, Holder for Keyboard Stand, Length: 16 cm, Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included), With stoppers and two-part tube clamps, Can be mounted anywhere without... moreDetails
-
Sonor ZM6547 Cymbal HolderSonor ZM6547 Cymbal Holder, Cymbal Holder for Concert and Marching Bass Drums,... Sonor ZM6547 Cymbal Holder, Cymbal Holder for Concert and Marching Bass Drums, The ideal holder for marching cymbals on the bass drum, Mounted between two tensioning screws via the supplied belt moreDetails
-
Sonor Sound Plate f#4Sonor Sound Plate F#4, Single Sound Bar, Note: f#4, For Sonor models SG, G1, G... Sonor Sound Plate F#4, Single Sound Bar, Note: f#4, For Sonor models SG, G1, G2, NG10, NG11, NG30, NG31, Length: 5.8 cm, Available tones: c2 - f#4 (not included) moreDetails
-
LP 444N Vibra Slap HolderLP 444N Vibra Slap Holder, Holder, For Vibra Slap LP 444N Vibra Slap Holder, Holder, For Vibra Slap moreDetails
-
Pearl PGH-20 Universal Guiro H...Pearl PGH-20 Universal Guiro Holder, Universal guiro holder, For screwing on p... Pearl PGH-20 Universal Guiro Holder, Universal guiro holder, For screwing on percussion holder moreDetails
-
Sonor Sound Plate d2Sonor Sound Plate d2, Single Sound Bar, Note: d2, For Sonor models SG, G1, G2,... Sonor Sound Plate d2, Single Sound Bar, Note: d2, For Sonor models SG, G1, G2, NG10, NG11, NG30, NG31, Length: 13.1 cm, Available tones: c2 - f#4 (not included) moreDetails
-
Sonor Sound Plate d#2Sonor Sound Plate d#2, Single Sound Bar, Note: d#2, For Sonor models SG, G1, G... Sonor Sound Plate d#2, Single Sound Bar, Note: d#2, For Sonor models SG, G1, G2, NG10, NG11, NG30, NG31, Length: 12.8 cm, Available tones: c2 - f#4 (not included) moreDetails
-
K&M 18944 Universal HolderK&M 18944 Universal Holder, Universal Holder with Clamp, Suitable for X-Keyboa... K&M 18944 Universal Holder, Universal Holder with Clamp, Suitable for X-Keyboard stand with 30 mm support arm, Recommended for the K & M models 18930, 18940, 18990 and 18995, Height of the vertical tube adjustable in 8 steps, 3/8" Threaded connector,... moreDetails
-
C.A. Seydel Söhne Gecko Harmon...C.A. Seydel Söhne Gecko Harmonica Holder, Harmonica holder, Modern holder for ... C.A. Seydel Söhne Gecko Harmonica Holder, Harmonica holder, Modern holder for Blues Harmonicas with practical magnetic attachment, Quick-Drop function and all imaginable settings for stress-free playing, Includes practical transport bag made of robust... moreDetails
-
Adam Hall 88001 D Recess PlateAdam Hall 88001 D Recess Plate, Package For Tour Label, Galvanised steel: 1 mm... Adam Hall 88001 D Recess Plate, Package For Tour Label, Galvanised steel: 1 mm, Indent dimensions: 195 x 145 mm, Outside dimensions: 220 x 170 mm, Depth: 6 mm, Mounting holes: 5.1 mm, Weight: 320 g, Suitable tour label Art. #172032# moreDetails
-
Sonor ZKS40N Holder for KS40, ...Sonor ZKS40N Holder for KS40, KSP, Retaining Pins, For KS40, KSP40, KSP40M and... Sonor ZKS40N Holder for KS40, KSP, Retaining Pins, For KS40, KSP40, KSP40M and KSP40X models, Colour: White, Quantity: 2 Pieces moreDetails
-
Jaspers Holders 60SJaspers Holder 60S, Holder, Length: 60cm, Load capacity: up to 15 kg (extendab... Jaspers Holder 60S, Holder, Length: 60cm, Load capacity: up to 15 kg (extendable with shelf reinforcement up to 40 kg load capacity - not included), With stoppers and two-piece tube clamps, For mounting at any location, without disassembling the stand,... moreDetails
-
Lefima 8860 Mounting Plate Sna...Lefima 8860 Mounting Plate Snare Drum, Mounting Plate for Small Marching Drum,... Lefima 8860 Mounting Plate Snare Drum, Mounting Plate for Small Marching Drum, For screwing onto a small drum, For suspending drum with the carrying device (eagle) moreDetails
-
DW TB12-SC Satin Chrom Tom Hol...DW TB12-SC Satin Chrome Tom Holder, Tom Rosette, Finish: Satin chrome DW TB12-SC Satin Chrome Tom Holder, Tom Rosette, Finish: Satin chrome moreDetails
-
Sonor DTH-VT 675MC double tom ...Sonor DTH-VT 675MC double tom holder, Double Tom Holder, 600 Series, T-Bar sys... Sonor DTH-VT 675MC double tom holder, Double Tom Holder, 600 Series, T-Bar system, For Sonor Vintage Series, Omni Ball System, With memory clamp moreDetails
Ads related to wall mount plate holder
Wall mount plate holder Musical Instrument Accessories in Musical Instruments & Accessories on Bizrate.co.uk: Compare prices on Wall mount plate holder Musical Instrument Accessories from hundreds of stores and buy from Musical Instruments & Accessories stores, rated and certified by consumers using the Bizrate.co.uk store rating scheme. Simply select the Musical Instrument Accessories store that has the price or discount you are looking for. If a Musical Instrument Accessories store is not rated yet it means that Bizrate.co.uk is still collecting shopper reviews at this time.