Doepfer A-118 Noise/Random Generator

Description:

Doepfer A-118 Noise/Random Vintage Ed., Noise / Random Generator@+Module A-118 is a noise and random voltage generator. The A-118 generates the signals white noise, coloured noise, and random voltage. Whilst white and coloured noise can be used both as... More

Description:

Doepfer A-118-2, Eurorack Module, Noise and random generator, Output for white noise, Output for coloured noise - proportions mixable, Output for continuous random voltage with level control, Track & Hold or Sample & Hold mode selectable, Current... More

Description:

Doepfer A-110-6, Eurorack Module, Trapezoid Thru Zero Quadrature VCO, Uses quadrature trapezoid as the fundamental waveform, Features linear Thru Zero frequency modulation and quadrature outputs for all waveforms (two 90 degree out of phase signals... More

Description:

Doepfer A-118-2 VE, Eurorack Module, Vintage Edition with black front panel, Noise and random generator, Ouput for white noise, Output for coloured noise (red and blue noise mixable), Output for continuous random voltage with level control, Track &... More

Description:

Doepfer A-101-6, Six Stage Opto FET VCF, New filter module in which so-called opto FETs are used to control the filter frequency, Dimensions (W x D): 40.3 mm (8 HP) x 65 mm, Power requirement: 40 mA More

Description:

Doepfer A-162, Dual Trigger Delay, Allows delayed output of the input signal, Power requirement: +40 mA (+ 12V) / -0 mA (-12V), Width: 8 HP / 40.3 mm, Depth: 45 mm (measured from the back of the front panel) More

Description:

Behringer Dual Noise / Random Gen. 1016, Eurorack Module, 2 Noise generators, each with selector switch for white or pink noise, Level control (max. +/-5 V) and signal output, 2 Generators for random voltages, Each with attenuator (max. +/-5 V), On/off... More

Description:

Doepfer A-149-2, Eurorack module, Expansion module for the A-149-1 (Article Nr: #199098#), Supplies 8 digital, random voltages, Eurorack format, Width: 4 HP, Depth: 35 mm, Power requirement: +40 mA (+ 12V) / -10 mA (-12V)@+*Note:* Must be mounted... More

Description:

Doepfer A-106-5 SEM Filter, Filter, 12 dB Multi-mode filter, in which the circuit of the SEM module is used, Width: 8HP 40.3 mm, Depth: 55 mm (measured from the rear of the front panel), Power requirements: +30 MA (+ 12V) / -20 mA (-12V) More

Description:

Doepfer A-199 Spring Reverb Module VE, Spring reverb module in Eurorack format, By way of spiral springs electronically recreates the reverb effect, Spring system with 3 separate springs, Reverb signal can be fed back to the input, Width: 8 HP, Depth:... More

Description:

Doepfer A-160-5 VC Clock Multiplier, Voltage Controlled Clock Multiplier, Multiplication factor can be controlled by control voltage or a regulator, Width: 4 HP, Depth: 35 mm, Power requirements: +50 mA (+12 V) / -0 mA (-12 V) More

Description:

Doepfer A-140, ADSR Envelope Generator@+The module A-140 is a envelope generator and since it delivers control voltages, belongs to the modulation-modules. As soon as the ADSR is triggered at gate-input, it generates an adjustable control signal called... More

Description:

Doepfer A-143-9, Quadrature LFO / VCO, Can simultaneously produce sine and cosine signals, 4 Outputs that are phase shifted by 90 degrees, Eurorack format, Width: 8 HP, Depth: 50 mm, Power requirement: +30 mA (+ 12V) / - 30 mA (-12V) More

Description:

Intellijel Designs Noise Random Tools 1 U, Eurorack Module, Useful tools for Eurorack systems, Clock and random pulse source with adjustable rate, Analogue pink and white noise source, Sample/Track and Hold, Slew block with input and output, Width: 22... More