1-30
of
2,957
results
Sort by
-
HT Instruments PV CHECKs Basic...With the PV-Checks all required electrical safety tests on photovoltaic system... With the PV-Checks all required electrical safety tests on photovoltaic systems can be carried out simply, safely and in accordance with VDE 0126-23 (EN 62446). The simple operation (auto-sequence measurement sequence) enables a safe, reliable and fast... moreDetails
-
HT Instruments Easytest Electr...Functions:AUTO Sequence (Ra- RCD - Riso)Low ohm measurement with 200 mA DCINSU... Functions:AUTO Sequence (Ra- RCD - Riso)Low ohm measurement with 200 mA DCINSULATION MEASUREMENT (L-PE / L-N / N-PE)Polarization measurement (PI & DAR)RCD TYPE A, ACNetwork and loop impedanceShort-circuit current with OK / NO displayRotating... moreDetails
-
VOLTCRAFT FIT-100 Electrical t...Fully programmable operation; Errors are indicated by the color change of the ... Fully programmable operation; Errors are indicated by the color change of the backlight; Precise FI circuit breaker test; 3-digit measured value display; Checks and measures the trip values of RDDS; Selection of 0° or 180° phase angle; SAFETY: EN... moreDetails
-
Benning 05042101 Electrical te...The Benning PV 1-1+ is an enhancement of the Benning PV 1-1 and offers improve... The Benning PV 1-1+ is an enhancement of the Benning PV 1-1 and offers improved test compatibility of PV modules of the latest technology with high efficiency. The optimized overload protection offers a 300% higher protection against transient... moreDetails
-
Sonel MZC-304 F Electrical tes...The extra small and handy loop impedance measuring device MZC-304 F from Sonel... The extra small and handy loop impedance measuring device MZC-304 F from Sonel is used to measure the loop impedance of ZL-PE, ZL-N and ZL-L in 230/400V networks. The test current varies depending on the mains voltage between 7.6A and max. 13.3A. The... moreDetails
-
Chauvin Arnoux C.A 6133 Electr...The installation testers C.A 6131 and C.A 6133 are intended to test the safety... The installation testers C.A 6131 and C.A 6133 are intended to test the safety of electrical installations: For new installations before commissioning, for existing installations even during operation, and to locate faults. Especially for test... moreDetails
-
Gossen Metrawatt M711A Equipme...Reliable and precise tester from Gossen Metrawatt in a compact design.This tex... Reliable and precise tester from Gossen Metrawatt in a compact design.This text is machine translated. moreDetails
-
Cable tester R151010 Trend Net...NaviTEK IE is a compact hand tester for commissioning, preventive maintenance ... NaviTEK IE is a compact hand tester for commissioning, preventive maintenance and error diagnostics for Industrial Ethernet PROFINET networks as well as Ethernet IP standard networks. Developed under the premise of simplifying all test routines, the... moreDetails
-
HT Instruments HT-PT01 Equipme...The ideal supplement to your workshop initial equipment with all measuring and... The ideal supplement to your workshop initial equipment with all measuring andTest options according to DIN VDE 0104.This text is machine translated. moreDetails
-
Gossen Metrawatt PROFiTEST H+E...Design the safe future of e-mobility with the diagnostic tester and test adapt... Design the safe future of e-mobility with the diagnostic tester and test adapter! The robust device surprises with extended testing functionality and user-oriented user comfort. Beyond the standard-compliant function testing of charging pillars... moreDetails
-
Beha Amprobe GT-650-D Equipmen...Device tests: measure and document today - even faster, even easier.This text ... Device tests: measure and document today - even faster, even easier.This text is machine translated. moreDetails
-
Testboy TV 455 Equipment teste...The VDE-tester TV 455 is a professional, multi-functional, portable test instr... The VDE-tester TV 455 is a professional, multi-functional, portable test instrument for the implementation of all measurements for the comprehensive inspection of electrical installations in buildings. The following measurements and tests can be... moreDetails
-
-36%VOLTCRAFT GM-70 Magnetic field...Suitable for universal magnetic measurements on industrial, mechanical and ele... Suitable for universal magnetic measurements on industrial, mechanical and electrical materials in the laboratory use. With the help of the separate probe is a simple operation possible and also ideal for remote measurements. The micro-processor... moreDetails
-
Benning DUSPOL digital Two-pol...The DUSPOL digital is a digital TRUE RMS voltage and continuity tester with re... The DUSPOL digital is a digital TRUE RMS voltage and continuity tester with resistance and frequency range. The voltage tester is suitable for electrical engineering, industry, maintenance, service (troubleshooting) and photovoltaic areas.Reliable... moreDetails
-
VOLTCRAFT MS-440 Magnetic fiel...For contact-less detection of a magnetic field in magnet valves, coils, soleno... For contact-less detection of a magnetic field in magnet valves, coils, solenoids and electrical relays. For testing the sensor is simply held to the component to be tested. A bright red LED shows an available electromagnetic field. With its the robust... moreDetails
-
Gigahertz Solutions ME 3951 A ...Professional combination meter for alternating electrical and magnetic fields.... Professional combination meter for alternating electrical and magnetic fields. Covers the entire frequency range of the TCO guideline for workstations with monitor screens, which is accepted worldwide: 5 Hz to 400 kHz. The integrated frequency filter... moreDetails
-
Gigahertz Solutions MK10 HF EM...Economical combination for the private sector: high-quality measurement techno... Economical combination for the private sector: high-quality measurement technology for low-frequency (high voltage, household, electrical equipment, etc.) and high frequency devices (cell phones, cordless phones, WLAN, etc.). Nevertheless simply to... moreDetails
-
Gigahertz Solutions ME3851A LF...Professional combination meter for alternating electrical and magnetic fields.... Professional combination meter for alternating electrical and magnetic fields. Covers the entire frequency range of the TCO guideline for workstations with monitor screens, which is accepted worldwide: 5 Hz to 400 kHz. The integrated frequency filter... moreDetails
-
VOLTCRAFT MS-410 Magnetic fiel...For contact-less detection of a magnetic field in magnet valves, coils, soleno... For contact-less detection of a magnetic field in magnet valves, coils, solenoids and electrical relays. For testing the sensor is simply held to the component to be tested. A bright red LED shows an available electromagnetic field. With its the robust... moreDetails
-
Benning IT 130 VDE tester Cali...Technical safety testing of electrical equipment after installation, modificat... Technical safety testing of electrical equipment after installation, modification or as a regular re-examination in accordance with VDE 0100/ 0105 and IEC 60364 can be carried out with the BENNING IT 130 simply and rationally. In addition, the FI/RCD... moreDetails
-
Testboy TV465 Equipment tester...The Testboy® TV 465 is a device tester independant of the mains for testing mo... The Testboy® TV 465 is a device tester independant of the mains for testing mobile devices according to DIN VDE 0701-0702. Due to its easy operation and handling, electrical devices / tools with ON / OFF switch, heat devices, motor devices, lights,... moreDetails
-
-27%Hansor Circuit Breaker Mini, t...Single-pole thermal overcurrent protection switch, compact narrow model. Can b... Single-pole thermal overcurrent protection switch, compact narrow model. Can be replaced fully with flat-fuse inserts in the connection area. Can be plugged in every car flat-fuse holder. Suitable for car repair garages, schools and road services.This... moreDetails
-
Hansor Circuit Breaker Standar...Single-pole thermal overcurrent protection switch, compact narrow model. Can b... Single-pole thermal overcurrent protection switch, compact narrow model. Can be replaced fully with flat-fuse inserts in the connection area. Can be plugged in every car flat-fuse holder. Suitable for car repair garages, schools and road services.This... moreDetails
-
Hansor Circuit Breaker Standar...Single-pole thermal overcurrent protection switch, compact narrow model. Can b... Single-pole thermal overcurrent protection switch, compact narrow model. Can be replaced fully with flat-fuse inserts in the connection area. Can be plugged in every car flat-fuse holder. Suitable for car repair garages, schools and road services.This... moreDetails
-
-21%Hansor Circuit Breaker Mini, t...Single-pole thermal overcurrent protection switch, compact narrow model. Can b... Single-pole thermal overcurrent protection switch, compact narrow model. Can be replaced fully with flat-fuse inserts in the connection area. Can be plugged in every car flat-fuse holder. Suitable for car repair garages, schools and road services.This... moreDetails
-
Testboy 2 Multifunction tester...The Testboy 2 circuit and continuity tester has a wide range of uses. The full... The Testboy 2 circuit and continuity tester has a wide range of uses. The fully insulated plastic case is shock-proof and break proof making it especially suitable for daily use in harsh environments. moreDetails
-
GMW TG basic 1 Equipment teste...The safety tester TG basic 1 is a test device for testing the protective measu... The safety tester TG basic 1 is a test device for testing the protective measures according to DIN EN 62638/DIN VDE 0701-0702 for mobile electrical equipment. A very light tester in a robust housing for mobile use with battery operation. Simple... moreDetails
-
Benning ST 725 Equipment teste...With the battery and mains-operated device tester ST 725, mobile, simple and c... With the battery and mains-operated device tester ST 725, mobile, simple and cost-effective testing of electrical devices/work equipment can be carried out according to DIN VDE 0701-0702, DGUV regulation 3 (BGV A3), Austrian Electro/Austrian Standard E... moreDetails
-
Fluke FLUKE-1537 Insulation te...This measuring device offers finely adjustable test voltages from 250 to 2,500... This measuring device offers finely adjustable test voltages from 250 to 2,500 V, resistance measurements up to 500 GΩ and a short-circuit current up to 5 mA and thus enables fast and stable measurements. Improve productivity and plant safety with a... moreDetails
-
-30%Hansor Circuit Breaker Mini, t...Single-pole thermal overcurrent protection switch, compact narrow model. Can b... Single-pole thermal overcurrent protection switch, compact narrow model. Can be replaced fully with flat-fuse inserts in the connection area. Can be plugged in every car flat-fuse holder. Suitable for car repair garages, schools and road services.This... moreDetails
Ads related to automotive electrical circuit tester
Automotive electrical circuit tester, Conrad-Electronic - duplicate Electrical Supplies in Home & Garden on Bizrate.co.uk: Compare prices on Automotive electrical circuit tester, Conrad-Electronic - duplicate Electrical Supplies from hundreds of stores and buy from Home & Garden stores, rated and certified by consumers using the Bizrate.co.uk store rating scheme. Simply select the Electrical Supplies store that has the price or discount you are looking for. If a Electrical Supplies store is not rated yet it means that Bizrate.co.uk is still collecting shopper reviews at this time.